Руководство По Работе для Brother XS3109

Скачать
Страница из 120
78
UTILITY STITCHES —————————————————————————————————————————————————————————————————————————————————————————————————————
■ Adding new characters after sewing
After sewing a combination of characters, you 
can add characters to the combination using the 
following method.
Memo
● When you have finished sewing, the pattern 
No. of the first character in the current 
combination is shown on the LCD.
a
Press the utility stitch key.
(Do not skip this step.)
a Utility Stitch key
b
Press the character stitch key and confirm that 
the character stitch indicator is lit.
a Character stitch key
b Character stitch indicator
c
If necessary, press the character stitch key 
once or more to select the desired stitch type 
(until the target stitch type number is 
displayed on the LCD.)
a Character stitch key
b Stitch type number
d
Add new characters by following the 
procedure described in “Combining 
characters” (page 77).
X
New characters are added next to the 
last character of the combination.
■ Making a new combination of characters after 
sewing
Memo
● When you have finished sewing, the pattern 
No. of the first character in the current 
combination is shown on the LCD.
a
Select the first character of the new 
combination.
b
Press the “+” side of 
 (stitch width 
adjustment key).
a Stitch width adjustment key
X
The old combination of characters is 
cleared from memory, and the pattern 
No. shown in the LCD is entered as the 
first character of a new combination.
c
Add characters by following the procedure 
described in “Combining characters” 
(page 77).
a
a
b
a