Руководство По Работе для Brother PR1000e
27
l
Select the reference edge and reference point
corresponding to those for the first pattern,
and then press
corresponding to those for the first pattern,
and then press
.
a
Reference edge and reference point
→ Message appears on screen and carriage will move
after pressing
.
m
Continue with step
(Connecting Three Patterns)” to finish
connecting the patterns.
connecting the patterns.
Sliding the Position of the Pattern to
be Connected
be Connected
When using the pattern connecting function, patterns
can be connected by sliding them, instead of only
aligning patterns along reference edges and reference
points. This can be done when you want the pattern to
be equally spaced when embroidered. The vertical and
horizontal shifts can be set up to ±99.9 mm.
can be connected by sliding them, instead of only
aligning patterns along reference edges and reference
points. This can be done when you want the pattern to
be equally spaced when embroidered. The vertical and
horizontal shifts can be set up to ±99.9 mm.
a
First pattern
b
Second pattern
a
Note
• The arrangement of patterns displayed in the screen
may differ slightly from the actual embroidery.
Use a ruler to measure the vertical and horizontal
shifts before changing the settings.
Use a ruler to measure the vertical and horizontal
shifts before changing the settings.
b
a