Руководство По Работе для Brother PR1050X
BASIC SETTINGS AND HELP FEATURE
233
6
Specifying thread sensor
If thread sensor is set to “OFF”, the machine does
not stop until embroidering is finished, even if the
thread breaks or there is no more thread in the
bobbin. Set thread sensor to “ON”, except when it
is necessary to set it to “OFF”.
not stop until embroidering is finished, even if the
thread breaks or there is no more thread in the
bobbin. Set thread sensor to “ON”, except when it
is necessary to set it to “OFF”.
When the machine is purchased, “ON” is selected.
The thread sensor can be specified from page 5 of
the settings screen.
the settings screen.
a
Touch
or
to select the desired
setting.
Changing the pointer shape when
a USB mouse is used
a USB mouse is used
The shape can be selected for the pointer that
appears when a USB mouse is connected.
Depending upon the background color, select the
desired shape from the three that are available.
appears when a USB mouse is connected.
Depending upon the background color, select the
desired shape from the three that are available.
When the embroidery machine is purchased,
is selected.
The mouse pointer setting can be specified from
page 5 of the settings screen.
page 5 of the settings screen.
a
Touch
and
to select the pointer shape
from the three settings available (
,
and ).
Note
• Normally, set thread sensor to “ON”.
When thread sensor is set to “OFF”, the
machine will not be able to detect if the
upper thread has become tangled.
Continuing to use the machine with tangled
thread may cause damage.
machine will not be able to detect if the
upper thread has become tangled.
Continuing to use the machine with tangled
thread may cause damage.
Memo
• The setting remains selected even if the
machine is turned off.