Руководство По Работе для Brother PR1050X
252
1. Polyester mesh cut-away stabilizer works
extremely well with light-colored fabrics since
it prevents a shadow from showing through on
the front after you have trimmed away the
excess. This type of backing is ideal whenever
you need stability with a light and soft touch in
your finished product, for example, with baby
garments.
it prevents a shadow from showing through on
the front after you have trimmed away the
excess. This type of backing is ideal whenever
you need stability with a light and soft touch in
your finished product, for example, with baby
garments.
2. Cut-away stabilizer is excellent for medium- to
heavyweight knits, however it can also be used
on woven material. It will hold a large number
of stitches and with two or three layers can hold
a tremendous amount of stitches. This type of
backing is also available in black for those who
want the inside of their garments to look as
good as the outside. Black stabilizer is very
useful on similarly colored garments of
lightweight fabrics. The black backing is less
likely to show through as compared to white
backing.
on woven material. It will hold a large number
of stitches and with two or three layers can hold
a tremendous amount of stitches. This type of
backing is also available in black for those who
want the inside of their garments to look as
good as the outside. Black stabilizer is very
useful on similarly colored garments of
lightweight fabrics. The black backing is less
likely to show through as compared to white
backing.
3. Tear-away stabilizer can be used on
mediumweight woven fabrics and sturdy
fabrics such as canvas, poplin and denim. This
stabilizer will hold many stitches especially
when used in two or more layers. This type of
stabilizer is made of a non-woven material that
enables it to easily be torn away from the edges
of your embroidery design when it is
completed. This stabilizer is also available in
black.
fabrics such as canvas, poplin and denim. This
stabilizer will hold many stitches especially
when used in two or more layers. This type of
stabilizer is made of a non-woven material that
enables it to easily be torn away from the edges
of your embroidery design when it is
completed. This stabilizer is also available in
black.
4. Water-soluble stabilizer is useful when you
need to keep the nap or pile, for example, on
towels, from interfering with the placement of
stitches. Fabrics such as terry cloth, corduroy,
velvet and faux fur are examples of materials
that have a nap or pile that can actually
penetrate embroidery stitches as your machine
sews. The result is an unfinished and often
sloppy appearance when fibers of the fabric
poke out between the finished stitches of an
embroidery design. In these situations, water-
soluble stabilizer is used as a topping to hold
the fibers of the fabric flat so the stitches can be
placed on top neatly and accurately. Water-
soluble stabilizer is also used as a backing
when stitching lace or other motifs where the
desired result is only the stitching. This is
accomplished with water-soluble stabilizer,
which can easily be pulled off of the fabric after
embroidering is completed and any remnants
can easily be dissolved with water. Water-
soluble stabilizer is also used as a backing on
towels, where you often need some
stabilization, but any remnants of a formal
backing must not be visible in the finished
product.
towels, from interfering with the placement of
stitches. Fabrics such as terry cloth, corduroy,
velvet and faux fur are examples of materials
that have a nap or pile that can actually
penetrate embroidery stitches as your machine
sews. The result is an unfinished and often
sloppy appearance when fibers of the fabric
poke out between the finished stitches of an
embroidery design. In these situations, water-
soluble stabilizer is used as a topping to hold
the fibers of the fabric flat so the stitches can be
placed on top neatly and accurately. Water-
soluble stabilizer is also used as a backing
when stitching lace or other motifs where the
desired result is only the stitching. This is
accomplished with water-soluble stabilizer,
which can easily be pulled off of the fabric after
embroidering is completed and any remnants
can easily be dissolved with water. Water-
soluble stabilizer is also used as a backing on
towels, where you often need some
stabilization, but any remnants of a formal
backing must not be visible in the finished
product.
5. Self-adhesive (peel-and-stick) backing is used
on those difficult-to-hoop fabrics. This backing
is applied (with sticky side up) to the underside
of the frame, enabling your fabric to “stick on”
the exposed surface in the embroidery area.
When the embroidery is finished, the fabric can
be removed, the excess backing can be
disposed of and the process repeated.
is applied (with sticky side up) to the underside
of the frame, enabling your fabric to “stick on”
the exposed surface in the embroidery area.
When the embroidery is finished, the fabric can
be removed, the excess backing can be
disposed of and the process repeated.