Руководство По Работе для Brother PR1050X
APPENDIX
267
7
c
Lower the L-shaped bracket to make it
touch the machine bed and then tighten the
two hexagonal screws using the Allen
screwdriver (medium). Firmly tighten the
screws.
touch the machine bed and then tighten the
two hexagonal screws using the Allen
screwdriver (medium). Firmly tighten the
screws.
1 L-shaped bracket
d
Using the Allen screwdriver (large), loosen
the four hexagonal screws on the inside of
the ring. Loosen the screws only by about
one turn.
the four hexagonal screws on the inside of
the ring. Loosen the screws only by about
one turn.
1 Hexagonal screws
2 Allen screwdriver (large)
→ When the screws are loosened, the ring can be
2 Allen screwdriver (large)
→ When the screws are loosened, the ring can be
lowered.
e
Insert the pad between the machine bed
and the ring of the cap frame driver.
and the ring of the cap frame driver.
1 Pad
2 Machine bed
3 Ring of the cap frame driver
2 Machine bed
3 Ring of the cap frame driver
f
Lightly press down the ring, and then use
the Allen screwdriver (large) to tighten the
four hexagonal screws on the inside of the
ring.
Firmly tighten the screws.
the Allen screwdriver (large) to tighten the
four hexagonal screws on the inside of the
ring.
Firmly tighten the screws.
1 Ring
g
Remove the pad inserted in step
e
.
Note
• Do not loosen them too far.
CAUTION
• Make sure that each hexagonal screw is firmly
tightened. If any screw remains loosen, injuries
may result.
may result.