Руководство По Работе для Brother PR1050X
30
Attaching the embroidery frame
holder
holder
Attach the embroidery frame holder to the
carriage.
carriage.
a
Use the embroidery frame holder
appropriate for the embroidery frame that
you are using. (Refer to page 88 to 91.)
appropriate for the embroidery frame that
you are using. (Refer to page 88 to 91.)
b
Remove the two thumb screws of the
embroidery frame holder.
embroidery frame holder.
1 Thumb screws
2 Corner covers
2 Corner covers
c
Align the holes in the embroidery frame
holder with the pins on the frame-mounting
plate of the carriage.
holder with the pins on the frame-mounting
plate of the carriage.
1 Pins on the frame-mounting plate
2 Corner covers
3 Holes in the embroidery frame holder
2 Corner covers
3 Holes in the embroidery frame holder
d
Secure the embroidery frame holder with
the two thumb screws removed in step
the two thumb screws removed in step
b
.
1 Thumb screws
This completes the preparation of the machine.
Note
• Each embroidery frame holder has different
color of corner cover.
Holder A: White corner covers
Holder B: Light gray corner covers
Holder C: Dark gray corner covers
(Optional)
Holder A: White corner covers
Holder B: Light gray corner covers
Holder C: Dark gray corner covers
(Optional)
Note
• Using the disc-shaped screwdriver
included, firmly tighten the thumb screws.
• Two types of embroidery frame holders are
included with this machine. Embroidery
frame holder A is used with the four
included embroidery frames. (Refer to
“Correctly Using the Embroidery Frames”
on page 88 for the details.)
frame holder A is used with the four
included embroidery frames. (Refer to
“Correctly Using the Embroidery Frames”
on page 88 for the details.)