Руководство По Работе для Brother PR1050X

EMBROIDERING TUTORIAL

Needle precautions

Be sure to observe the following precautions concerning the correct choice of needle for your machine.

Checking the needle

Sewing with a bent needle is extremely dangerous since the needle may break while the machine is
operating.

Place the flat side of the needle on a flat surface and check that the distance between the needle and the
flat surface is even. If the needle is bent or the tip of the needle is broken, replace the needle with a new
one. (Refer to “Changing the Needle” on page 86.)

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.

CAUTION

• Your machine is designed to use household embroidery needles. The factory recommended needle is “HAX

130 EBBR” (Organ). Schmetz needles 130/705 H-E may be used as a substitute. Use of any other needles
may break the needle or thread or damage the needle-threading mechanism or result in injuries.

• Never use bent needles. Bent needles can easily break, possibly resulting in injuries.

■ Good needle

■ Bad needle

If the distance between the needle
and the flat surface is not even, the
needle is bent. Do not use a bent
needle.

1 Flat side
2 Needle type marking

3 Flat surface

CAUTION

• Only use prewound bobbin (COATS “L” type/TRU-SEW POLYESTER

“Filaments”) or bobbins designed specifically for this machine. Use of any other
bobbin may result in injuries or damage to the machine.

• Use a bobbin thread that has been correctly wound, otherwise the needle may

break or the thread tension will be incorrect.

• When winding a bobbin, only use optional bobbin winder (refer to page 279) and metal bobbins (Part

code: 100376-053).

• When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74 dtex/2 and

100 dtex/2).

COATS

Polyester