Руководство По Работе для Brother PR1050X

62

e

• The threader moves back away from the needle. The 

thread is pulled through the needle eye.

• The wiper comes out and catches the thread between 

the needle and the threader.

• The threader goes back to the original home position.

This completes the upper threading for needle bar 1.

Thread the remaining needle bars in the same way. 

■ Moving and threading a selected 

You can move and thread a selected needle bar to 
the embroidering position at any time.

a

→ The needle bar move screen appears.

b

→ The selected needle bar moves to the position of 

embroidery.

Note

• If the thread is not correctly passed through 

the groove in the thread cutter, the 
message “Wiper error” appears and the 
needle cannot be threaded. Be sure to 
securely pass the thread through the 
groove.

• If enough thread is not pulled out, the 

thread cannot be pulled through the thread 
cutter.

Note

• If the needle bar to be threaded is not 

moved to the embroidering position, the 
needle cannot be threaded with the 
automatic needle-threading mechanism. 
For the remaining needle bars, perform the 
following operation to move the needle bar 
to the embroidering position before trying to 
thread the needle.