Руководство По Работе для Brother PR1050X
68
After sewing is finished, remove the embroidery frame, and then remove the fabric from the frame.
Removing the embroidery frame
a
With both hands, grab the left and right
sides of the arms of the embroidery frame
holder, and then slightly lift up the frame.
sides of the arms of the embroidery frame
holder, and then slightly lift up the frame.
The pins on the arms of the embroidery frame holder
should come out of the holes in the sides of
embroidery frame.
should come out of the holes in the sides of
embroidery frame.
b
Pull off the embroidery frame toward you.
Removing the fabric
a
Loosen the outer frame screw.
→ If the screw was tightened using a disc-shaped
screwdriver, use the included disc-shaped
screwdriver to loosen it.
screwdriver to loosen it.
b
Remove the outer frame, and then remove
the fabric.
the fabric.
12. Removing the Embroidery Frame and Fabric
CAUTION
• When removing the embroidery frame, make
sure that the start/stop button is lit in red. If
the start/stop button is flashing in green, the
machine may start sewing. If the machine
accidentally starts operating, injuries may
result.
the start/stop button is flashing in green, the
machine may start sewing. If the machine
accidentally starts operating, injuries may
result.
• When removing the embroidery frame, be
careful that the embroidery frame does not hit
any other part of the machine.
any other part of the machine.
• Do not lift up the embroidery frame holder
with extreme force, otherwise it may be
damaged.
damaged.