Руководство По Работе для Brother PR-650/650C

Starting/Ending Position Settings 123

The machine can set the start point and the ending point separately from the 9 points of the pattern. Those 
are upper-left corner, upper-center, upper-right corner, center-left, center-center, center-right, lower-left 
corner, lower-center and lower-right corner.
These settings can be used to repeatedly sew a pattern along a diagonal.

The starting/ending position settings are specified 
from the embroidering settings screen.
When the embroidery machine is purchased, both 
the starting position and the ending positions are 
set to the center of the pattern.

1

X

The starting/ending position settings 
screen appears.

1 Specifies the starting position
2 Specifies the ending position

Touch a key to select the setting.
The highlighted key shows the currently 
selected setting.

Example

3 Touch this key to close this screen.

■ Specifying the starting position

2

X

When a starting position is selected, the 
ending position is automatically set to the 
same position.

X

The embroidery frame moves to the 
starting position.

■ Specifying the ending position

3

4

X

The embroidering settings screen appears 
again.

● The starting/ending position settings do 

not change until the key for a new setting 
is touched. The settings specified before 
the machine is turned off remain selected 
the next time that the machine is turned 
on.

This key is selected.

1

2

3