Руководство По Работе для Brother PR1050X
ILLUSTRATION SCAN
25
c
When scanning is finished, specify the
necessary settings in the scan image
confirmation screen.
necessary settings in the scan image
confirmation screen.
Change the settings to adjust the image so it can easily
be converted to the desired pattern.
be converted to the desired pattern.
*
To stop scanning and return to the screen in
step
b
, press
.
d
Move
to frame the image for the
pattern.
e
Press .
The screen for confirming the converted image
appears.
f
In the screen for confirming the converted
image, adjust the image as necessary as in
step
image, adjust the image as necessary as in
step
c
.
*
To enlarge the image, press
.
*
To display the image before being converted, press
. Compare the images before and after
being converted, and then change the settings if
necessary.
necessary.
*
To return to the previous screen, press
.
After changes to the settings described above have
been applied,
changes to
. Press
to check that the image is as desired.
g
Press .
The pattern drawing screen is displayed.
h
If necessary, edit the scanned image.
*
After the scanned image is converted to stitching, it
appears as a background in the pattern drawing
screen. Use gauge a to adjust the transparency of
appears as a background in the pattern drawing
screen. Use gauge a to adjust the transparency of
the background. Each press of
lightens the
background, making the illustration pattern darker.
Each press of
darkens the background, making
the illustration pattern lighter.
a
Max. Number of
Colors
Colors
The number of colors in an image will
be reduced less than the number
specified here, and then the outline
will be extracted.
be reduced less than the number
specified here, and then the outline
will be extracted.
b
Remove Background
Select whether or not the
background color will be included as
one of the colors.
background color will be included as
one of the colors.
c
Line
Select whether or not the outline will
be detected as a line. A thick outline
can also be detected as a region.
When detected as a line, the line
thickness and color can be specified.
be detected as a line. A thick outline
can also be detected as a region.
When detected as a line, the line
thickness and color can be specified.
Memo
• Press
to detect the outline.
Line thickness can be specified from 1.0
mm (1/16 inch) to 5.0 mm (3/16 inch).
mm (1/16 inch) to 5.0 mm (3/16 inch).
• Press
to select the outline color. Select
by touching the color, or moving
icon
using
in the color selection screen.
c
b
a
Note
• During scanning, the small dots that appear
and unnecessary lines can be erased.
a