Руководство По Работе для Brother PR-1000
Using the Optional Cap Frame 271
7
—————————————————————————————————————————————————————————————————————————————————————
f
Pull the ends of the cap out from the center
to remove any slack.
to remove any slack.
g
Use the clips to secure the cap.
Attach the clips with their handles folded
inward. If the handles are pointed outward,
they may be hit by the machine’s presser
foot.
Attach the clips with their handles folded
inward. If the handles are pointed outward,
they may be hit by the machine’s presser
foot.
1 Clips
h
While pulling the lever toward you that is
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the right.
After the cap frame has been rotated 180°
and the brim points to the right, release the
lever to lock the cap frame in place.
located behind the handle on the right side
of the mounting jig, rotate the cap frame to
the right.
After the cap frame has been rotated 180°
and the brim points to the right, release the
lever to lock the cap frame in place.
1 Handle
2 Lever
2 Lever
i
Pull the ends of the cap out from the center
to remove any slack in the same way as the
other side.
to remove any slack in the same way as the
other side.