Руководство По Работе для Brother PR650e/PR650eC
Resume Embroidering After Turning Off the Machine 111
3
—————————————————————————————————————————————————————————————————————————————————————
5
Touch .
X
The stitch navigating screen appears.
6
Touch
two or three times to go back
two or three stitches.
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the needle drop point is
positioned where stitches have already
been sewn.
been sewn.
7
Touch .
X
The embroidering screen appears again.
8
Touch
, and then press the start/
stop button to continue embroidering.
Memo
● The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can also be set to stop when the thread
color is changed. (For details, refer to
“Setting the Machine to Stop at Color
Changes” on page 128.)
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can also be set to stop when the thread
color is changed. (For details, refer to
“Setting the Machine to Stop at Color
Changes” on page 128.)
1