Руководство По Установке для Brother PR1000e
ENGLISH
2/4
—————————————————————————————————————————————————————————————————————————————————————
4
Using the included wrench, firmly tighten
each hexagonal support screw (two on each
side).
each hexagonal support screw (two on each
side).
5
Align the holes in the right table bracket
with the hexagonal support screws on the
right side of the machine.
with the hexagonal support screws on the
right side of the machine.
1 Hexagonal support screws
2 Holes in right table bracket
2 Holes in right table bracket
6
Align the right table bracket with the holes
in the two hexagonal supports, insert the
screws and lightly tighten to hold the
bracket in place.
in the two hexagonal supports, insert the
screws and lightly tighten to hold the
bracket in place.
1 Screws
7
Attach the left table bracket following steps
5
and
6
for the left side.
8
Using the Phillips screwdriver included with
your machine or one of your own, firmly
tighten all screws.
your machine or one of your own, firmly
tighten all screws.
X
The right and left table brackets are
installed on the machine.
installed on the machine.
Memo
● Even if you sew without using the table,
you can leave the brackets attached.