Руководство По Работе для Brother SB3129
UTILITY STITCHES ——————————————————————————————————————————————————
118
Changing the stitch
density
density
If a decorative satin stitch has been selected, the
stitch density can be changed.
stitch density can be changed.
1
Select a decorative satin stitch
.
2
Press
(settings key) in the operation panel.
X
The settings screen appears.
3
Press
,
,
and
(arrow keys) until
is selected.
4
Press
(OK key).
X
The screen for specifying the stitching
density of the decorative satin stitch
appears.
density of the decorative satin stitch
appears.
5
Press
and
until the desired density is
selected.
Select
for coarser stitching or select
for finer stitching.
6
Press
(OK key).
X
The initial stitch screen appears again, and
the stitching density is changed.
the stitching density is changed.
Changing the pattern length
The length of one part of a satin stitch can be set to
one of five sizes.
one of five sizes.
1
Select a satin stitch
.
2
Press
(settings key) in the operation panel.
X
The settings screen appears.
3
Press
,
,
and
(arrow keys) until
is selected.
4
Press
(OK key).
X
The screen for changing the length of a satin
stitch appears.
stitch appears.
5
Press
and
until the desired ratio is
selected.
The length can be set within the range of
The length can be set within the range of
and .
X
The satin stitch length is changed.
6
Press
(OK key).
X
The initial stitch screen appears again.
●
If the stitching density is too fine,
depending on the needle, the stitches
may be bunched together, causing the
needle to break.
depending on the needle, the stitches
may be bunched together, causing the
needle to break.
CAUTION