Руководство По Работе для Brother SB170

—

Put the thread behind the guide above the
needle.

• The thread can easily be passed behind the

needle bar thread guide by holding the
thread in your left hand, then feeding the
thread with your right hand.

1 Needle bar thread guide

Thread the needle from front to back
leaving a thread tail of about 5 cm
(2 inches).

1 5 cm (2 inches)

Note

● Make sure you raise the presser foot lever

and the thread take-up lever before you feed
the upper thread.

● If you incorrectly feed the thread you may

cause sewing problems.

Drawing up the lower
thread

While lightly holding the end of the upper
thread, slowly turn the handwheel toward
you (counterclockwise) by hand to lower
and then raise the needle.

Pull on the upper thread to draw up the
lower thread.

1 Upper thread
2 Lower thread

Pull out about 10 cm (4 inches) of both
threads and put them toward the back of
the machine under the presser foot.

1 Upper thread
2 Lower thread