Руководство По Работе для Brother SB7500

Скачать
Страница из 172
152
APPENDIX
 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 
Care and Maintenance
Simple sewing machine maintenance operations are described below.
Cleaning the machine surface
If the surface of the machine is dirty, lightly soak a 
cloth in neutral detergent, squeeze it out firmly, and 
then wipe the surface of the machine. After cleaning 
it once with a damp cloth, wipe it again with a dry 
cloth.
CAUTION
Cleaning the race
Sewing performance will suffer if dust collects in the 
bobbin case. Therefore, it should be cleaned 
periodically.
a
Turn off the sewing machine.
b
Unplug the power supply cord from the power 
supply jack on the right side of the sewing 
machine. 
CAUTION
c
Remove the flat bed attachment or the 
embroidery unit if either is attached.
d
Loosen the presser foot holder screw and 
remove the presser foot holder(page 45), and 
then loosen the needle clamp screw and 
remove the needle (page 41).
a Presser foot holder
b Presser foot holder screw
c Needle clamp screw
e
Grasp both sides of the needle plate cover, and 
then slide it toward you.
a Needle plate cover
X
The needle plate cover is removed.
f
Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
a Bobbin case
● Unplug the power supply cord before 
cleaning the machine. Otherwise, injuries 
or an electric shock may occur.
● Unplug the power supply cord before 
cleaning the machine. Otherwise, injuries 
or an electric shock may occur.
a
b
c
a
a