Инструкция С Настройками для Brother PE-DESIGN 10

173

On Using the Cutwork Functions

Before using Cutwork functions, check the following.

■

Set the "Machine Type" to multi-

needle embroidery machine

For the Cutwork functions to be available, click

then [Design Settings]. Under [Machine Type],

select .

■

Outline shapes and text can be

used to create a cutwork pattern

• Outline shapes that have been drawn with the

tools indicated below.

• Text created in fonts other than built-in fonts 025

and 029, a user-defined font or a small text font.

• Patterns when [Outline Shapes] is selected in

the [From] selector of the [Import] pane.

■

Use a multi-needle machine that

has been upgraded to work with

Cutwork functions

The embroidery machine should be set to cutwork
mode in the settings screen before starting to
embroider. Refer to the included Operation Manual
for the details of embroidery machine operation.

Basic requirements for
Cutwork functions

Cutwork functions cannot be used with single-

needle embroidery machines. In addition, some
multi-needle machines may not support the

functions. Be sure to check that your machine is

compatible with the cutwork functions.