Инструкция С Настройками для Brother PE-DESIGN 10
297
On Settings
On Settings
■
Machine thread trimming
according to settings specified in
Layout & Editing
If
is selected in the [Design Settings] dialog
box of Layout & Editing, trimming can be turned on
or off at each jump stitch location.
These settings are saved in embroidery data files
(.pes).
If you are using our multi-needle embroidery
machine with the Jump Stitch Trimming function
turned on to embroider this imported .pes file, the
machine will trim the thread according to the PES
data settings.
or off at each jump stitch location.
These settings are saved in embroidery data files
(.pes).
If you are using our multi-needle embroidery
machine with the Jump Stitch Trimming function
turned on to embroider this imported .pes file, the
machine will trim the thread according to the PES
data settings.
■
Specifying trimming settings in
Layout & Editing
1
Select
in
the
[Design Settings] dialog
box.
cc
2
Display the trimming locations in Layout &
Editing.
Editing.
cc
3
Turn on/off jump stitch trimming for each
embroidery pattern.
embroidery pattern.
cc
If necessary, change settings for the
following.
following.
• Automatically turning off trimming when the
jump stitch length is less than that
specified.
specified.
cc
• Default setting for turning on/off jump stitch
trimming when a new embroidery pattern is
created.
created.
cc
Jump Stitch and Jump
Stitch Trimming
Stitch Trimming
a
For details on the jump stitch trimming function of
the machine, refer to the Operation Manual
provided with your embroidery machine.
provided with your embroidery machine.
Stitching
Jump stitch
Stitching
a
These settings are applied only when
embroidering with our multi-needle embroidery
machines. These settings are not applied with any
machines. These settings are not applied with any
other embroidery machine.