Инструкция С Настройками для Brother PE-DESIGN PLUS2
47
Printing
Printing
Before printing, you may need to change the print
settings for the embroidery design files.
settings for the embroidery design files.
1
Click ,
then
[Print], then [Print Setup].
a
Specify the paper size.
b
Specify the paper orientation.
c
Print type
Actual Size:
Actual Size:
Select this option to print the design at
actual size and the sewing information
(dimensions of the embroidery pattern,
sewing color order, stitch count and
hoop position) on separate pages.
actual size and the sewing information
(dimensions of the embroidery pattern,
sewing color order, stitch count and
hoop position) on separate pages.
Reduced Size:
Select this option to print a reduced
image together with all of the above-
mentioned information on a single
page.
image together with all of the above-
mentioned information on a single
page.
d
Print option
Print sewing area box & center axes:
Print sewing area box & center axes:
Select this option to print black lines to
indicate the sewing area and the
center axes for the data. (This setting is
only available when [Actual Size] is
selected.)
indicate the sewing area and the
center axes for the data. (This setting is
only available when [Actual Size] is
selected.)
Print template grid:
Select this check box to print green
lines to represent the grid printed on
the embroidery sheet included with the
hoop. (This setting cannot be selected
if [User Hoop] has been selected as
the Design Page size.)
lines to represent the grid printed on
the embroidery sheet included with the
hoop. (This setting cannot be selected
if [User Hoop] has been selected as
the Design Page size.)
Divide embroidery image into 2 pages:
Select this check box to print at actual
size and on A4- or Letter-size paper a
design that is larger than the paper size
by dividing it in two and printing each
half on different pages.
(This setting is only available when
[Actual Size] is selected in the [Print
Setup] dialog box and when the
Design Page is set to the larger hoop
sizes. This setting is not available if a
[User Hoop] size is selected.)
With this split printing feature,
size and on A4- or Letter-size paper a
design that is larger than the paper size
by dividing it in two and printing each
half on different pages.
(This setting is only available when
[Actual Size] is selected in the [Print
Setup] dialog box and when the
Design Page is set to the larger hoop
sizes. This setting is not available if a
[User Hoop] size is selected.)
With this split printing feature,
/
or
/
is printed in the lower-right
corner of the paper to indicate which
half is printed.
half is printed.
Color Changes:
Select this check box to print the thread
color change information for the
pattern.
When this check box is cleared, the
information for the necessary threads
is printed. This allows you to check the
total number of thread colors.
color change information for the
pattern.
When this check box is cleared, the
information for the necessary threads
is printed. This allows you to check the
total number of thread colors.
e
Stitch image
Normal:
Normal:
Select this option to print the design as
lines and dots.
lines and dots.
Realistic:
Select this option to print a realistic
image of the design. To change the
settings of the realistic image, click
[Attributes].
image of the design. To change the
settings of the realistic image, click
[Attributes].
Specifying print settings
a
c
e
b
d
a
If the [Divide embroidery image into 2 pages]
check box is cleared and you print on paper of a
larger size, the design does not print in two halves.
Likewise, if you print on paper of a smaller size, the
Likewise, if you print on paper of a smaller size, the
design might be cut off.