Справочное Руководство для Brother PE-DESIGN 10

6

The installation procedure will differ depending on the software that you have. For first-time users of PE-
DESIGN 10, install the full version of PE-DESIGN 10. For users upgrading from PE-DESIGN version 5, 6, 7, 
8 or NEXT, install the software and activate the "PE-DESIGN Software Key". Perform the installation 
according to the following instructions.

■ Installing PE-DESIGN 10 (full version)

cc

“[STEP1] Installing the Software” on page 6

■ Upgrading from version 5, 6, 7, 8 or NEXT

cc

“[STEP1] Installing the Software” on page 6

cc

“[STEP2] Activating the "PE-DESIGN Software Key" (only for users upgrading from PE-DESIGN 
version 5, 6, 7, 8 or NEXT)” on page 9

This section describes how to install the application software.

a

• If the installation is interrupted or not performed as described, the software will not be installed correctly.
• In order to install the software, you must log on to the computer using an account with administrator 

privileges. If you are not logged on with the administrator account, the password for the administrator 
account may be requested with Windows

®

 8.1. Type in the password to continue the procedure.

• Before beginning the installation, follow the procedure below to back up the installer onto your computer.

1) Create a backup folder on the computer.
2) Copy the entire [PE-DESIGN 10] folder from the "PE-DESIGN Software Key" into the folder created in 

step 1).

• Do not delete the data in the [PE-DESIGN 10] folder on the "PE-DESIGN Software Key".

1

Plug the "PE-DESIGN Software Key" 
into the USB port on the computer.
→ After a short while, the [AutoPlay] 

dialog box automatically appears.

→ For Windows

®

 7 users, follow step 

3

 after the [AutoPlay] dialog 

appears.

a

Do not unplug or plug in the "PE-DESIGN Software Key" until the installation is completed.