Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

4

Before you start installing the software on your PC, check that your system meets the following require-
ments. If it does not, consult your dealer. 

Note: 
When performing an upgrade, if there is no previous 
version of the application installed, the upgrade can 
not be installed. After installing the application, you 
should uninstall any previous versions of the applica-
tion.

1

Start Windows (refer to the Windows manual).

If you have other Windows applications running, 
click 

 to exit, close all the other applications 

and start again.

2

Insert the CD-ROM into the CD-ROM drive. The 
installer starts up automatically and displays a 
dialog allowing you to select the language.

If the installer does not start up automatically:

Click .

Click 

 on the menu. The 

 dialog appears.

Type the full path of the installation program. 
Example:

 

 if the CD-ROM is in drive D, or 

 if the CD-ROM is in drive E.

IBM-PC or compatible

486 or Later (we recommend Pentium or higher)

Windows 95 or Later

32M or more (we recommend 64M or more)

30M or more

SVGA (800 

´

 600) or more, High color (16 Bits) or more

An RS-232C port that is not used with other peripherals

To connect to the Security Device, 25 pin Printer Port (Parallel Port) is 
needed.

A mouse that is supported by your version of Windows.

A graphic printer that is supported by your system (if you wish to print 
your images)

If you have a TWAIN standardized scanner, the application can import 
images directly from the scanner.