Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

70

and stitch at this step (see “Applying the sewing attributes to an outline” on page 69).
The 

 dialog for the selected stitch displays. 

In this mode, you can apply the current sewing attributes to a portion of the outline. You can also change 
the sewing attributes applied to a portion of the outline.
A single line of the outline extends from both sides of the cursor position to the next branch points.

■

1

Click 

 on the Tool Box.

The shape of the cursor changes to 

 and is displayed together with a small figure of the Tool 

Box button. The Sewing Attributes bar now looks like this: 

You can select the stitch at this step or after applying them to a portion of the outline. See “Stitch” 
on page 76. The color cannot be set separately for a portion of the outline. If you set a portion of 
the outline before setting the whole outline, the default color will be black.

2

You can also use the menu (see “Sewing Attributes” on page 92) or the method described on page 
71 (Checking the sewing attributes of a portion of an outline) to define the characteristics of the 
stitch. If you do not make these settings now, the current settings will be applied, but you can mod-
ify them later.

◆

If necessary, change the settings.
See “Sewing Attributes” on page 92.

To restore the default value of a set-
ting after changing it, click the 

button at the left of that setting.

◆

To apply the new settings to the out-
line, then click the outline of the pat-
tern(s) using the left button.

◆

Click 

 to remove the dialog from 

the screen.