Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

97

■

Moves to Stage 3.

No shortcut key for this function

1

Click 

, then 

.

If you were in Stage 4, a message warns you that may lose some data if you go back to Stage 3. If 
you want to make sure no data is lost, click 

 in that dialog and save your settings. Other-

wise, click 

 and you are returned to Stage 3.

If you were in Stage 2, this dialog displays. 

◆

Set the resolution. For details, see the follow-
ing table.

◆

Set the thinning process. For details, see the 
following table.

◆

Set the size as a percentage of the original 
using the 

 slider (setting range: 25 % ~ 

400 %). You will not be able to enlarge the 
image beyond the limits of the Design Page 
area. If necessary, set the Design Page size by 
clicking 

 and selecting one 

of the two other Design Page sizes in the dialog 
that opens.

The preview window reflects the setting 
changes you make.

◆

If necessary, click 

. A cross-shaped cur-

sor will appear. Select the desired area by mov-
ing the cursor across the image. You will return to 
this screen as soon as you release the mouse.

The preview window reflects the setting 
changes you make.

◆

Click 

 to confirm.

◆

Click 

 to exit.

This setting determines how detailed the generated pattern image will be. Basically, 
the outline of the line image is converted into pieces of broken lines. To make a more 
detailed pattern, you need more points on the broken lines, which also increases the 
length of the file.
In general, 

 provides a sufficient resolution without making the file too large.

If 

 gives a satisfactory result for a particular bitmap image, select 

 in 

order to keep the file as small as possible.
Select 

 only if the image contains many small details, and 

 does not give 

a satisfactory result.