Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

67

The shape of the cursor changes to 

 and is displayed together with a small figure of the Tool 

Box button. The Sewing Attributes bar now looks like this: 

You can select the color and stitch at this step or after applying them to the outline. See “Color” on 
page 73 and “Stitch” on page 73.
You can also use the menu (See “Sewing Attributes” on page 85) or the following method to define 
the characteristics of the stitch. If you do not make these settings now, the current settings will be 
applied, but you can modify them later.

2

Click the outline that you want to set.
The color and stitch selected on the Sewing Attributes bar are applied to the clicked outline.

■

1

Click 

 on the Tool Box.

The shape of the cursor changes to 

 and is displayed together with a small figure of the Tool 

Box button.

2

Click the outline using the mouse’s right button.
The Sewing Attributes bar shows the color and stitch for the selection. You can change the color 
and stitch at this step (see “Applying the sewing attributes to an outline” above).
The 

 dialog for the selected stitch displays. 

◆

If necessary, change the settings.
See “Sewing Attributes” on page 85.

To restore the default value of a set-
ting after changing it, click the 

button at the left of that setting.

◆

To apply the new settings to the out-
line, then click the outline of the pat-
tern(s) using the left button.

◆

Click 

 to remove the dialog from 

the screen.