Руководство По Работе для Brother 3534DT

When using the sewing machine, basic safety precautions should always be followed, including the following.
Read all instructions before using.

The sewing machine should never be left unattended 
when plugged in. Always unplug this sewing machine 
from the electrical outlet immediately after using and 
before cleaning.

1.  Do not allow to be used as a toy. Close attention is 

necessary when the sewing machine is used by or 
near children.

2.  Use this sewing machine only for its intended use 

as described in this manual. Use only accessories 
recommended by the manufacturer as contained in 
this manual. 

3.  Never operate this sewing machine if it has a 

damaged cord or plug, if it is not working properly, 
if it has been dropped or damaged, or dropped into 
water. Return the sewing machine to the nearest 
authorized dealer or service center for examination, 
repair, electrical or mechanical adjustment.

4.  Never operate the sewing machine with any air 

openings blocked. Keep ventilation openings of the 
sewing machine and foot controller free from the 
accumulation of lint, dust, and loose cloth.

5.  Never drop or insert any object into any openings.
6.  Do not use outdoors.
7.  Do not operate where aerosol (spray) products are 

being used or where oxygen is being administered.

8.  To disconnect, turn the main switch to the symbol 

"O" position which represents off, then remove plug 
from outlet.

9.  Do not unplug by pulling on cord. To unplug, grasp 

the plug, not the cord.

10.  Keep fi ngers away from all moving parts. Special 

care is required around the sewing machine needle.

11.  Always use the proper needle plate. The wrong 

plate can cause the needle to break.

12.  Do not use bent needles.
13.  Do not pull or push fabric while stitching. It may 

defl ect the needle causing it to break.

14.  Switch the sewing machine to the symbol "O" 

position when making any adjustments in the needle 
area, such as threading needle, changing needle, or 
changing presser foot, etc.

15. Always unplug the sewing machine from the 

electrical outlet when removing covers, lubricating, 
or when making any other user servicing 
adjustments mentioned in the instruction manual.

16. Electrical Hazards:

-  This machine should be connected to an AC 

power source within the range indicated on the 
rating label. Do not connect it to a DC power 
source or inverter. If you are not sure what kind 
of power source you have, contact a qualifi ed 
electrician.

-  This machine is approved for use in the country of 

purchase only.

17.  This sewing machine is not intended for use 

by young children or infi rm persons without 
supervision.

18.  Young children should be supervised to ensure that 

they do not play with this sewing machine.

19. Do not disassenble the machine.
20. If the LED light unit (light-emitting diode) is 

damaged, it must be replaced by authorized dealer.

1.  (For U.S.A. only) 
 

This appliance has a polarized plug (one blade wider 

than the other) to reduce the risk of electric shock, 
this plug is intended to fi t in a polarized outlet only 
one way. 

 

If the plug does not fi t fully in the outlet, reverse 

the plug. If it still does not fi t, contact a qualifi ed 
electrician to install the proper outlet.

 

Do not modify the plug in any way.

2.  Make sure you watch the needles carefully while you 

are sewing. Do not touch the hand wheel, needles, 
knives, or other moving parts.

3.  Turn off the main power and unplug the cord in the 

following circumstances:
- When you have stopped using the machine
- When you are replacing or removing the needle or 

any other part

- If there is a power failure while you are using the 

machine

- If you are checking or cleaning the machine
- Leaving the machine unattended

4.  Do not store anything on the foot controller.
5.  Fully plug the machine directly into the wall. Do not 

use extension cords.

6.  If water is dropped on the machine, unplug the 

machine immediately, and contact your local 
authorized dealer.

7.  Do not put furniture on the cord.
8.  Do not bend the cord, or pull on the cord to unplug.
9.  Do not touch the cord with wet hands.
10. Place the machine near to the wall outlet.
11. Do not place the machine on an unstable surface.
12. Do not put on the soft cover.
13. If you notice any abnormal sound or condition, 

consult your local authorized dealer.

1.  Do not store this machine in direct sunlight or in 

high humidity conditions. Do not use or store the 
machine near a heater, iron, halogen lamp or other 
hot object.

2.  Use only mild soaps or detergents to clean the 

case. Benzene, thinner, and scouring powders can 
damage the case and machine, and should never 
be used.

3.  Do not drop or hit the machine.
4.  Always consult this manual before you replace or fi t 

the presser foot, needle, or any other parts to make 
sure you fi t them correctly.

To repair or adjust the machine
If the machine breaks down or needs adjustment, 
fi rst follow the troubleshooting table to inspect and 
adjust the machine yourself. If the problem persists, 
consult your local authorized dealer.