Руководство По Работе для Brother LX3014
20
1
g
Raise the presser foot lever to check that the
presser foot is securely attached.
presser foot is securely attached.
Removing the presser foot
holder
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the oval screwdriver to remove the
presser foot holder.
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the oval screwdriver to remove the
presser foot holder.
■ Removing the presser foot holder
a
Remove the presser foot.
• For details, refer to “Replacing the presser
foot” (page 19).
b
Use the oval screwdriver to loosen the presser
foot holder screw.
foot holder screw.
a Oval screwdriver
b Presser foot holder
c Presser foot holder screw
b Presser foot holder
c Presser foot holder screw
■ Attaching the presser foot holder
a
Align the presser foot holder with the lower-
left side of the presser bar.
left side of the presser bar.
a Presser foot holder
b Presser bar
b Presser bar
b
Hold the presser foot holder in place with
your right hand, and then tighten the screw
using the oval screwdriver in your left hand.
your right hand, and then tighten the screw
using the oval screwdriver in your left hand.
a Oval screwdriver
b Presser foot holder
c Presser foot holder screw
b Presser foot holder
c Presser foot holder screw
Note
● If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
incorrect.