Справочник Пользователя для Samsung VR9000H Robot with 10x more powerful suction, 80 W
ENGLISH-21
troubleshooting
symptom
checklist
the PoWeRbot is not
working at all.
f
Check if the emergency switch is on.
f
Check if all the icons are displayed on the display panel.
f
Check if the POWERbot's battery is depleted.
f
Replace the batteries (AAA type) if the remote controller is not working.
the PoWeRbot
has stopped during
cleaning.
f
When POWERbot is immobilized by an obstacle such as a cord, threshold etc,
pick it up and move it away from the obstacle.
pick it up and move it away from the obstacle.
- If any fabric or string is caught in a drive wheel, turn off the emergency switch
and remove the fabric or string before using it again.
suction power is weak.
f
When there's too much dust in the dustbin, suction power may get weakened.
Turn off the emergency switch and empty the dustbin.
Turn off the emergency switch and empty the dustbin.
f
If the intake (on bottom of POWERbot) is blocked by foreign matter, turn off the
emergency switch and remove foreign matter from the intake.
emergency switch and remove foreign matter from the intake.
f
When noise suddenly increase, turn off the emergency switch and empty the
dustbin.
dustbin.
f
If the dustbin is assembled incorrectly, suction power may get weakened. Turn
off the emergency switch and refer to page 17 for reassembling.
off the emergency switch and refer to page 17 for reassembling.
the PoWeRbot cannot
find the docking
station.
f
Check if there's a power failure or whether the power plug is unplugged.
f
Remove any obstacles around the docking station that may prevent
POWERbot from returning to the docking station.
POWERbot from returning to the docking station.
f
When there's foreign matter on the charge pins, charging can be affected.
Clean the foreign matter off the pins.
Clean the foreign matter off the pins.
the PoWeRbot
suddenly cleans
diagonally.
f
Check if the docking station is installed along the grain of wooden floors or
tiles.
tiles.
f
The POWERbot may clean in a diagonal direction if it is moving to another area
using the shortest route. It may also move at a diagonal if it made contact with
an obstacles at that angle, if it was charged at the docking station at an angle,
or if the grain of the wooden/tile floor skewed is in that direction.
using the shortest route. It may also move at a diagonal if it made contact with
an obstacles at that angle, if it was charged at the docking station at an angle,
or if the grain of the wooden/tile floor skewed is in that direction.
PoWeRbot does not
clean a certain area.
f
Check if the docking station is installed near a narrow passage or door, and
reinstall it in the other areas.
reinstall it in the other areas.
- If the docking station is installed near a narrow passage or door, the
POWERbot cannot pass through the passage or threshold.
SR2AJ90@@U_4ge_00740G-02_EN.indb 21
2016-08-12 오후 3:07:57