Справочник Пользователя для Samsung SR8F40

 

operating

auto Cleaning

 

■

If you press the Start/Stop button on the main unit or remote control 
without selecting a cleaning mode, an automatic cleaning run starts.

 

■

If cleaning begins when the vacuum cleaning robot is docked with the 
charger station, the time to return to the charger is decreased since the 
vacuum cleaning robot remembers its original position while moving.

 

■

If the vacuum cleaning robot starts the current cleaning run at a location 
other than the charging station and fails to locate the charging station 
while cleaning, it will stop near the location where it started cleaning.

 

■

If the battery level becomes too low while cleaning, the vacuum cleaning robot will automatically 
return to the charger station and resume cleaning after charging its battery. (Number of cleaning 
operations resumed : Once)

normal mode

turbo mode

Cleaning Complete 

1time

▶

1.  Set the mode.

2.  Cancel the mode.

•  If the vacuum cleaning robot has evaluated that cleaning is 

complete, the resume cleaning function is not performed.

•  If you move the vacuum cleaning robot when it is being 

charged or press a button, the vacuum cleaning robot 
judges cleaning to be complete and does not resume 
cleaning.

•  Do not move the vacuum cleaning robot when it is cleaning 

or press a button while it is cleaning. Otherwise, the 
vacuum cleaning robot judges cleaning to be complete and 
starts cleaning again from the beginning. 

•  Each time you press the Turbo button, the Turbo icon on 

the display panel is turned on or off sequentially. When the 
Turbo icon is turned on, you can start cleaning in Turbo 
mode.