Справочник Пользователя для Samsung SR8F40

 

troubleshooting

CHeCkLiSt Before SVC CaLLS

•  Is the Power Switch turned on?

•  Turn on the Power Switch.

•  Is cleaning mode 

 in the display 

panel turned on?

•  Press the 

 button. (To turn it 

off, press and hold the 

 button 

down for 3 seconds or longer.)

•  Is the battery level flashing only 

one level and is ‘Lo’ displayed in 
the display panel?

•  Lift up the vacuum cleaning robot, 

and manually dock the vacuum 
cleaning robot onto the charger to 
charge it.

•  Vacuum cleaning robot will not 

operate when the battery in the 
remote control is depleted.

•  Replace the batteries in the remote 

control. (AAA type)

•  Is the battery level flashing only 

one level and is ‘Lo’ displayed in 
the display panel?

•  Lift up the vacuum cleaning robot, 

manually dock the robot onto the 
charger to charge it.

•  Has the vacuum cleaning robot 

become hooked on wires on the 
floor?

•  Turn off the Power Switch and 

remove the wires.

•  Is the vacuum cleaning robot stuck 

to the floor where there is a height 
difference?

 

- The driving wheel is lifted.

•  Turn off the Power Switch and 

move the cleaning vacuum 
cleaning robot to another place to 
clean.

•  Is there a thin towel (cloth) 

wrapped around the driving wheel?

•  Turn off the Power Switch and 

remove the thin towel.

•  Is the vacuum cleaning robot stuck 

on the doorsill?

•  Turn off the Power Switch and 

move the vacuum cleaning robot 
to another place to clean.

•  Check whether the dust bin is full 

of dust.

•  Stop the vacuum cleaning robot 

and empty the dust bin.

•  Check whether the suction inlet is 

clogged by foreign substances.

•  Turn off the Power Switch and 

remove the foreign substances on 
the suction inlet.

•  Check whether the filter is clogged. •  Clean the filter well.

Troubleshooting