Справочник Пользователя для Samsung GGH SBS with Water Dispenser, 637 L
operating _15
operating _15
02 OPERA
TING
Using the Water Dispenser
Press the Water button. Place your cup the water
outlet and push gently against the dispenser pad.
Make sure the glass is in line with the dispenser to
prevent the water from splashing out.
outlet and push gently against the dispenser pad.
Make sure the glass is in line with the dispenser to
prevent the water from splashing out.
To get cooler water
- The dispensed water is cool, not
icy cold
- When you want colder water with
ice, dispense ice to your drink
glass first before filling it with water
to prevent water from splashing
out.
glass first before filling it with water
to prevent water from splashing
out.
Using the Ice Dispenser
Press the Ice button to select the type of ice you
want.
want.
Place your cup the ice outlet and push gently
against the dispenser pad. Make sure the glass is
in line with the dispenser to prevent the ice from
bouncing out.
against the dispenser pad. Make sure the glass is
in line with the dispenser to prevent the ice from
bouncing out.
When Cubed Ice is selected after using the Crushed
Ice feature, a small amount of residual crushed ice
might be produced.
Ice feature, a small amount of residual crushed ice
might be produced.
• Do not put your fingers, hands or any
other unsuitable objects in the chute or
ice-maker bucket.
ice-maker bucket.
- It may result in personal injury or material damage.
• Use only the ice maker provided with the
• Use only the ice maker provided with the
refrigerator.
• The water supply to this
refrigerator must only be
installed/connected by a
suitably qualified person
and connect to a potable
water supply only.
installed/connected by a
suitably qualified person
and connect to a potable
water supply only.
• In order to operate the
ice maker properly, water
pressure of 138 ~ 862 kPa
is required.
pressure of 138 ~ 862 kPa
is required.
The temperature display will move sequentially from
-14°C and -25ºC. When the display reaches -14ºC,
it will begin again at -25ºC.
-14°C and -25ºC. When the display reaches -14ºC,
it will begin again at -25ºC.
Five seconds after the new temperature is set the
display will again show the actual current freezer
temperature. However, this number will change as
the Freezer adjusts to the new temperature.
display will again show the actual current freezer
temperature. However, this number will change as
the Freezer adjusts to the new temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between
7ºC and 1ºC to suit your particular needs. Press
the Fridge button repeatedly until the desired
temperature is shown in the temperature display.
7ºC and 1ºC to suit your particular needs. Press
the Fridge button repeatedly until the desired
temperature is shown in the temperature display.
The temperature control process for the Fridge
works just like the Freezer process.
works just like the Freezer process.
Press the Fridge button to set your desired
temperature. After a few seconds, the Fridge will
begin tracking towards the newly set temperature.
This will be refl ected in the digital display.
temperature. After a few seconds, the Fridge will
begin tracking towards the newly set temperature.
This will be refl ected in the digital display.
The temperature of the freezer or the refrigerator
may rise from opening the doors too frequently, or
if a large amount of warm or hot food is placed in
either side.
This may cause the digital display to blink. Once
the freezer and refrigerator return to their normal set
temperatures the blinking will stop.
may rise from opening the doors too frequently, or
if a large amount of warm or hot food is placed in
either side.
This may cause the digital display to blink. Once
the freezer and refrigerator return to their normal set
temperatures the blinking will stop.
If the blinking continues, you may need to “reset” the
refrigerator. Try unplugging the appliance, wait about
10 minutes and then plug back in.
refrigerator. Try unplugging the appliance, wait about
10 minutes and then plug back in.
USING THE ICE AND COLD
WATER DISPENSER
WATER DISPENSER
When Ice Off blinks on the display panel, reinsert
the bucket and/or make sure it’s installed properly.
the bucket and/or make sure it’s installed properly.
No Ice
Select this if you want to
turn the ice maker off.
turn the ice maker off.
Push
Push
WARNING
Ice Chute
Ice Chute
Ice Bucket
Ice Bucket
Ice-Maker Cover
Ice-Maker Cover
DA99-01745K-14.indb 15
DA99-01745K-14.indb 15
15. 5. 22.
9:17
15. 5. 22.
9:17