Справочник Пользователя для Samsung Epic Galaxy S

Here is what you will need to have before you can 
successfully establish a connection between your Epic 
4G and a computer. 

䢇

microSD card (internally installed prior to start)

䢇

compatible USB cable (included)

1.

With the microSD card installed, connect your 
device to your computer using a compatible USB 
cable. (Wait for the connection to be completed. 
When connected, the host computer will 
automatically detect your device.)

2.

The USB icon (

) now appears in the top left 

Notifications area on your device.

3.

Tap 

Mass Storage

 from the 

Select USB mode

 

screen. 

䡲

Charging

 uses the connected USB cable to 

charge the device via your computer’s USB port.

䡲

Mass Storage

 uses the connected USB cable to 

provide data communication between the device 
and your computer. The device then appears as 
an external drive with its own drive letter.

䡲

Tethered Mode

 allows your computer to obtain an 

external data connection by using the device’s 
wireless data services and a wired USB 
connection. Choose from 

3G tethered mode

 or 

 

4G tethered mode

.

●

Go to samsung.com and visit the D700 
Product page, where you can navigate to 

Support

 tab 

> Downloads

 to obtain this driver.

●

FAQ

 also provide detailed 

information about this driver.

●

A wireless data connection can be done by 
using the device’s Sprint Hotspot feature 
(page 193).

Tap the 

Remember this choice

 option to store 

this action as your new default. If enabled, you 
will not be prompted with this screen again.

If you are using your device for Tethering, 
you may be prompted for additional 
drivers. 

 

The 

Samsung Mobile Driver 

for 

 

SPH-D700 contains the ADB, CDMA, & 
WiMAX drivers that are required for use of 
either Tethering (Phone as a Modem) or to 
utilize development tools.