Справочник Пользователя для Samsung SR8828
28_
Operating the cleaner
Operating the cleaner
When the Obstacle Sensor detects an obstacle during
the cleaning, the Robotic vacuum Cleaner reduces its
speed to minimize the bumping impact and the Bumper
Sensor also helps it lower the bumping impact.
It cleans the corners by reaching to them as close as
possible. (This Robotic vacuum Cleaner is a touching
type cleaner.)
the cleaning, the Robotic vacuum Cleaner reduces its
speed to minimize the bumping impact and the Bumper
Sensor also helps it lower the bumping impact.
It cleans the corners by reaching to them as close as
possible. (This Robotic vacuum Cleaner is a touching
type cleaner.)
USING THE ROBOTIC VACUUM CLEANER
EDGE CLEANING
The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed once.
automatically clean the house until cleaning is completed once.
■
If cleaning begins when the robotic vacuum cleaner is docked
with the charger station, the time to return to the charger is
decreased since the robotic vacuum cleaner remembers its
original position while moving.
decreased since the robotic vacuum cleaner remembers its
original position while moving.
■
If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station
and resume cleaning after charging its battery. (Number of
cleaning operations resumed: Once)
and resume cleaning after charging its battery. (Number of
cleaning operations resumed: Once)
While cleaning
When cleaning is
complete
About the Resume Cleaning function
• If the robotic vacuum cleaner has evaluated
• If the robotic vacuum cleaner has evaluated
that cleaning is complete, the resume cleaning
function is not performed.
function is not performed.
•
If you move the robotic vacuum cleaner when it
is being charged or press a button, the robotic
vacuum cleaner judges cleaning to be complete
and does not resume cleaning.
is being charged or press a button, the robotic
vacuum cleaner judges cleaning to be complete
and does not resume cleaning.
Do not move the robotic vacuum cleaner when it is cleaning or press a button
while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be
complete and starts cleaning again from the beginning.
while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be
complete and starts cleaning again from the beginning.
CAUTION
NOTE
Cancel the mode.
2
1
Set the mode.
▶
Main unit button
Configuration Sequence
4time
DJ68-00620T.indb 28
DJ68-00620T.indb 28
2012.1.11 4:15:11 PM
2012.1.11 4:15:11 PM