Справочник Пользователя для Samsung VCF700G Bezsáčkový vysavač s designem Motion Sync Design™, 850 W
22_
Troubleshooting
Troubleshooting
PROBLEM
SOLUTION
Motor does not start.
• Check cable, pulg and socket.
• Leave to cool.
• Leave to cool.
Suction force is
gradually decreasing.
gradually decreasing.
• Check for blockage and remove.
• Please unclog the intake.
• Please unclog the intake.
In operation, the
vacuum cleaner stops
after repeating runs
and stops three times.
vacuum cleaner stops
after repeating runs
and stops three times.
Cord does not rewind
fully.
fully.
• Pull the cord out 2-3 m and push down the cord rewind button.
Vacuum cleaner dows
not pick up dirt.
not pick up dirt.
• Check hose and replace if required.
Low or decreasing
suction.
suction.
• Please check fi lter and, if required, clean as illustrated in the
instructions. if fi lters are out of condition change them to new
ones.
ones.
Body overheating.
• Please check fi lters, if required clean as illustrated in the
instruction.
Static electicity
discharge.
discharge.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
• This can also occur when air in the room is very dry.
Please ventilate the room till air humidity becomes normal.
The vacuum cleaner
makes a strange
noise.
makes a strange
noise.
• In order to protect the motor in the cleanr, it rotates slowly when
you just turn on the cleaner.
(Before the motor stabilizes,) this causes the loud noise at the
initial state and it is not failure in the machine.
(Before the motor stabilizes,) this causes the loud noise at the
initial state and it is not failure in the machine.
This vacuum cleaner is approved by the following:
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
DJ68-00701L-00.indb 22
DJ68-00701L-00.indb 22
2013. 12. 2.
5:00
2013. 12. 2.
5:00