Справочник Пользователя для Samsung SL-C4060FX
Machine |
178
Performance Optimization
When this option is
On, you can wake up the machine from the power saving mode with the
following actions:
• Pressing
(
Power/Wakeup) on the control panel.
• Loading paper in a tray.
• Opening or closing the cover.
• Pulling a tray out or pushing a tray in.
• Place the originals in the Dual Scan Document Feeder (DSDF).
• Plug in the USB Drive device.
Low Power Save
Low Power Save option allows your machine to save power. When you are not using the machine
for a while, some parts of the machine automatically enter
for a while, some parts of the machine automatically enter
Low Power Save option. Low Power
Save option conserves less power than Power Save option.
Power Save
When you are not using the machine for a while, use this option to save power. The machine
conserves more power in
conserves more power in
Power Save option than in Low Power Save mode.
Auto Power Off
You can set the printer to turn power off automatically when the machine has been in power save
mode for the length of settings on the operator panel.
mode for the length of settings on the operator panel.
• Available setting range is from 5 min. to 240 min.
• To turn the machine on again, pressing
(
Power/Wakeup) on the control panel.
Timers (administrator only)
When there is no input for a certain period of time, the machine cancels the held job or exits the
current menu and goes in to the default settings. You can set the amount of time the machine will
wait before it cancels a held job or exits the current menu.
current menu and goes in to the default settings. You can set the amount of time the machine will
wait before it cancels a held job or exits the current menu.
You can also use this feature from the SyncThru™ Web Service. Open the Web browser
from your networked computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click
from your networked computer and type the IP address of your machine. When
SyncThru™ Web Service opens, click
Settings > Machine Settings > System > Setup.
•
System Timeout: The machine returns to the Copy menu if there is no input for the given time.
•
Held Job Timeout: When an error occurs while printing and there is no signal from the
computer, the machine holds a job for a specific time period before deleting it.
computer, the machine holds a job for a specific time period before deleting it.