Справочник Пользователя для Samsung Aspirateur-traîneau VCF700G Motion Sync Design ™, 12 Ws

Operating cleaner

 

03

 O

PERA

TING

 CLEANER

POWER BRUSH (SC12F70P Series)

1. 

•  The hose must be plugged into the 

canister and the power brush must be 
plugged into the hose and extension 
wand.

2. 

•  For best results, move the power brush 

slowly using short, overlapping strokes.

•  For heavily soiled areas, repeat strokes in 

several directions.

Do not invert the power brush while it is running.

3. 

You can check whether the power brush is operating correctly by lifting up the 
extension tube slightly to view the back of the brush.
The power brush will not operate when it is jammed or the unit is turned off.
If the power brush is jammed, unplug the power cord from the electrical outlet.
Turn the power brush over and remove the jammed object.
Turn the power brush back to the vacuuming position and resume vacuuming.

Overload protector

The overload protector shuts off the brush 
motor if the floor brush becomes obstructed. 
The floor brush will stop, but the suction 
motor will continue to run. To reset the 
overload protector, turn the vacuum off and 
unplug it. Clear the obstruction from the floor 
brush area. Use a pen tip to press down 
the reset switch. Turn the vacuum on and 
continue cleaning.