Справочник Пользователя для Samsung Cannister Vac with Standard Brush
Troubleshooting
_23
Troubleshooting
PROBLEM
SOLUTION
Motor does not start.
• Check cable, pulg and socket.
• Leave to cool.
• Leave to cool.
Suction force is
gradually decreasing.
gradually decreasing.
• Check for blockage and remove.
• Please unclog the intake.
• Please unclog the intake.
In operation, the
vacuum cleaner stops
after repeating runs
and stops three times.
Cord does not rewind
fully.
vacuum cleaner stops
after repeating runs
and stops three times.
Cord does not rewind
fully.
• Pull the cord out 2-3 m and push down the cord rewind button.
Vacuum cleaner dows
not pick up dirt.
not pick up dirt.
• Check hose and replace if required.
Low or decreasing
suction.
suction.
• Please check filter and, if required, clean as illustrated in the
instructions. if filters are out of condition change them to new
ones.
ones.
Body overheating.
• Please check filters, if required clean as illustrated in the
instruction.
Static electicity
discharge.
discharge.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
• This can also occur when air in the room is very dry.
Please ventilate the room till air humidity becomes normal.
The vacuum cleaner
makes a strange
noise.
makes a strange
noise.
• In order to protect the motor in the cleanr, it rotates slowly when
you just turn on the cleaner.
(Before the motor stabilizes,) this causes the loud noise at the
initial state and it is not failure in the machine.
(Before the motor stabilizes,) this causes the loud noise at the
initial state and it is not failure in the machine.