Справочник Пользователя для Samsung SR8845

22_

Operating the cleaner

INSTALLING THE ROBOTIC VACUUM CLEANER

CHARGING

2. Check the charge status of the robotic vacuum

cleaner.

- When charging starts, the battery level indicator and

“

” will be displayed in sequence in the display panel.

- When charging is complete, the battery level indicator and

“FULL” will be displayed in the display panel.

1. After aligning the charge pins of the main unit with

the charge pin of the charger station, press the main

unit until you hear a “Recharging power” sound from

the charger.

- The Charging Lamp turns green.

When the product is initially purchased, the battery

is fully discharged, and you must charge the robotic

vacuum cleaner manually.

Power Lamp

Charging Lamp

Power

Lamp

Charging Lamp

NOTE

• When the product is initially purchased, it will take about 120 minutes to fully charge the battery

and will run for about 90 minutes.

• When charging the battery while the battery is over-heated, the charging time can increase.

• Measures to take when charging is not smooth.

When the robotic vacuum cleaner cannot be automatically charged, check the following:

- Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset).

- Re-plug the power of the charger (Reset).

- Check whether there are any foreign substances on the charge connector and wipe the

charge connector on the main unit and the charger with a dry cloth.

- Check whether there are objects near the charger that are strong reflectors.

• When separating the robotic vacuum cleaner from the charger, it will discharge naturally.

- Charge the robotic vacuum cleaner through the charger, if possible. (When leaving your home

unattended for a long period of time due to a business trip, travelling etc., turn off the Power

Switch of the robotic vacuum cleaner and unplug the power of the charger to store them.)

Turn on the Power Switch at the bottom of the product.

■

When the battery level display flashes

while cleaning, the robotic vacuum cleaner

stops vacuuming and automatically

charges itself at the charger.

■

When the battery level flashes and “LO” is displayed while cleaning,

robotic vacuum cleaner cannot be operated by the remote control or

the buttons on the main unit. In this case, directly carry the robotic

vacuum cleaner to the charger to charge the battery. (This is when

the battery is completely discharged.)

Charge

complete

Charging

Required

charging

Charging

Fully charged

Flash

DJ68-00518N(0.0).indb 22

2010.2.22 11:58:1 AM