Справочник Пользователя для Samsung 蓝光播放器BD-J5500
Network Settings
Please contact your ISP to find
out if your IP address is static or
dynamic. If it is dynamic - and most
are - we recommend using the Auto
procedure for network setup. This is
easiest and will work in the majority
of cases. If it is static, you must
use the manual set up procedure.
Network setup directions start below.
✎
NotES
`
This unit can only be connected to a
Network via a wired connection.
Wired Network Settings
1. In the Home menu, press the ▲▼
1. In the Home menu, press the ▲▼
◄► buttons to select Settings,
and then press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Wired Network Settings, and
then press the v button. The
Wired Network Settings screen
appears.
Picture
Sound
Sound
Network
System
Language
Security
General
Support
Language
Security
General
Support
Settings
Wired Network Settings
Internet Protocol Setup : Auto
\
IP Address
: 0
0
0
0
Subnet Mask
: 0
0
0
0
Gateway
: 0
0
0
0
DNS
: Auto
DNS Server
:
0
0
0
0
>
Move " Select ' Return
4. In the Internet Protocol Setup
field, select Auto if it is not
selected. (Press v select Auto,
and then press v.)
5. The Auto Function acquires and
fills in the values for Ip Address,
Subnet Mask, etc., automatically.
✎
NotES
`
This process can take up to five
minutes.
6. After the Network Function has
acquired the network values,
press the REtuRN button.
7. Select Network test, and then
press v to ensure the player
has connected to your network.
8. When the Network Test is
complete, press the REtuRN
twice to return to the Main Menu.
9. If the Network Function does not
acquire the network values, go to
the directions for Manual Setup.
Manual Network Setup
Before you start manual network
Before you start manual network
setup, you need the network setting
values.
To enter the Network Settings
To enter the Network Settings
into your player, follow these
steps:
1. In the Home menu, press the ▲▼
◄► buttons to select Settings,
and then press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Wired Network Settings, and then
press the v button. The Wired
Network Settings screen appears.
4. Select the Internet Protocol Setup
field, and then press the v
button.
5. Press the ▲▼ buttons to select
Manual, and then press the v
button.
6. Press the ▼ button to go to the first
entry field (IP Address).
7. Use the number buttons on your
remote to enter numbers.
8. When done with each field, use the
► button to move to the next field.
You can also use the other arrow
buttons to move up, down, and
back.
9. Enter the Ip Address, Subnet
Mask, and Gateway values in the
same way.
10. Press the ▼ button to go to dNS.
11. Press the ▼ button to go to the first
DNS entry field.
12. Enter the numbers as above.
13. Press the REtuRN button on your
remote.
14. Run a Network Test to ensure
the player has connected to your
network.
Network test
Use this menu item to check whether your
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection
Network Status
Use to check whether a connection
to a network and the Internet has
been established.
device Name
Device Name function allows you to
device Name
Device Name function allows you to
change player's name by selecting
from device name list box.
Bd-Live Internet Connection
Set to allow or prohibit an Internet connection
Bd-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• prohibit : No Internet connection is
allowed for any BD-LIVE content.
14