Справочник Пользователя для Samsung 1,000 W 5.1Ch Blu-ray Home Entertainment System H6550

- English

Settings

Network Setup

When you connect this product to a network, you
can use network based applications and functions
such as Smart Hub and BD-LIVE, and upgrade the
product's software through the network connection.
For more information about accessing and using
Internet services, see the Network Services chapter
of this manual on pages 42~49. Instructions for
configuring the network connection start below.

Configuring Your Network Connection

If you didn't configure your network connection during
the initial settings procedure or you need to reset the
network connection, follow the directions below.

Before you begin, contact your Internet Service
Provider to find out if your IP address is static or
dynamic. If it is dynamic, and you have a wired
or wireless network, we recommend using the
Automatic configuration procedures described below.

If you are connecting to a wired network, connect the
product to your router using a LAN cable before you
start the configuration procedure.

To begin configuring your network connection, follow
these steps:

In the Home screen, select Settings, and then
press the

button.

Select Network, and then press the

button.

Select Network Settings, and then press the

button.

Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 22.

Wired Network

Wired – Automatic

After following Steps 1 to 3 above:

In the Network Settings screen, change
Network type to Wired. Then, select Connect
and press the

button. The product detects

the wired connection, verifies the network
connection, and then connects to the network.

When it is done, highlight OK, and then press

button.

Wired - Manual

If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings values manually.

After following Steps 1 to 3 above:

In the Network Settings screen, change
Network type to Wired. Then, select Connect
and press the

button.

The product searches for a network, and then
displays the connection failed message.

✎

If it is possible to connect the home cinema to
your network wirelessly, select Change Network
at this point, change the Network type to
Wireless, and then go to the instructions for
wireless networks on the next page.

Network Settings

Wired network connection failed.

MAC Address

XX:XX:XX:XX:XX:XX

IP Address

0. 0. 0. 0

Subnet Mask

0. 0. 0. 0

Gateway

0. 0. 0. 0

DNS Server

0. 0. 0. 0

Unable to connect to the network. Try the following: check if your IP address is set
correctly in IP Settings. Contact your Internet service provider for more information.

Change Network

IP Settings

Retry

Use the

buttons to select IP Settings, and

then press the

button. The IP Settings

screen appears.

Select the IP setting field, and then set it to
Enter manually.

Select a parameter to enter (IP Address, for
example), and then press

. Use the ,.

buttons on the remote control to enter the
numbers for the parameter. Or use the Num
keypad to enter a parameter number.

Press and

hold the 123 button until the Num pad appears on
the screen. When the Num pad appears, select a
number using the ,.

button and then press

the

button.Use the

buttons on the

remote control to move from entry field to entry
field within a parameter. When done with one
parameter, press the

button.

Press the , or . button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.

HT-H6550WM-XY-0519.indd 21

2014-05-19 4:22:02