Справочник Пользователя для Samsung SR8900 ROBOT VC with Auto-Emptying Dust Bin, 40 Watt, Silver Metal

troubleshooting 

06

 TROUBLESHOOTING

•  Check whether the power plug of 

the Charger (Station) is plugged 
correctly into the outlet.

•  If there are any obstacles within 

a range of about 1m in front of 
the Charger (Station) and about 
0.5m range to the left and right of 
the Charger (Station), you should 
remove the obstacles.

•  If there are any foreign substances 

on the change pin, wipe them off 
with a dry towel.

•  Is the VIRTUAL GUARD installed 

near the Charger (Station)?

•  Move the VIRTUAL GUARD to 

another place so that the Robot 
vacuum can charge automatically.

•  Are the batteries of the VIRTUAL 

GUARD worn out?

•  Replace the batteries. 

(2 type D (LR20) batteries)

•  Is the lamp turned off?

•  Check if the VIRTUAL GUARD 

is turned off and then turn the 
VIRTUAL GUARD on.

•  Are you using manganese drycell 

batteries?

•  Replace the batteries with new 

batteries. 
(2 type D (LR20) batteries)

•  The Robot vacuum may clean in a 

diagonal direction in the following 
cases.

 

- After the Robot vacuum has been 

charged while placed at an angle 
in the Charger (Station).

 

- When the Robot vacuum moves to 

another area by a shortened route 
after cleaning an area.

 

- When the angle of making 

contact with an obstacle is not 
perpendicular (90˚).

 

- When the floor is made of tiles or 

wood.

•  The cleaning direction is 

determined by the initial location. 
Since it cleans areas by drawing a 
map, it eventually covers the entire 
area. (Normal operation) 
Install the charging station in 
the direction of the grain of the 
wood, and start cleaning while the 
Robot vacuum is docked with the 
Charger (Station).

 

❈

In 52 page, there are additional troubleshooting for SAMSUNG Smart Home.

DJ68-00630D (EN)-00.indd   55

2014. 7. 23.   �� 6:15