Справочник Пользователя для Samsung SR20H9050U

Скачать
Страница из 28
ENGLISH-22
notes and cautions
Charging
Note
 
f
If the battery overheats during charging, it 
may take longer to charge.
 
f
When automatic charging is not working, 
please check the followings.
 
– Turn the emergency switch (on the bottom of 
POWERbot) off and on again. 
 
– Unplug the charger's power plug and then plug 
it back on. 
 
– Check whether there is any foreign matter in 
the charge pins and clean POWERbot and the 
charge pins of the charger with a dry cloth or 
rag. 
 
– Check for any obstacles such as reflective 
objects, chairs, etc. near the charger. 
 
f
If POWERbot is left detached from the 
charger, the battery will drain naturally. 
 
– Try to keep POWERbot being charged on the 
charger. (Turn off the emergency switch and 
leave the charger unplugged when planning 
to leave the house for long periods of time by 
going on a business trip or vacation, etc., )
in use
Note
 
f
The POWERbot may get caught on 
thresholds, etc. during cleaning.
 
– To restart operation, shut off the emergency 
switch, move POWERbot to an area where it 
can move easily and then turn on the power 
again.
 
f
The POWERbot cannot completely clean 
areas it cannot enter, such as corners, 
between the wall and sofa, etc.
 
– Please use another cleaning tool to clean them 
regularly.
 
f
The POWERbot cannot vacuum clumps of 
dirt, so some may remain on the floor after 
cleaning. 
 
– Please use another cleaning tool to clean them 
regularly.
 
f
If POWERbot is turned off, power cannot be 
turned on by the [Power] button of the remote 
control. Press and hold the [Start/Stop] 
button on POWERbot.
 
f
If the battery becomes low during Auto/
Max clean mode, POWERbot will recharge 
and finish cleaning the remaining area after 
recharging. (Repeat cleaning frequency: 
1 time) 
 
f
You cannot select and execute Max/Manual 
clean mode while charging.
 
f
Do not unnecessarily move POWERbot or 
press buttons while it is in Auto/Max clean 
mode. It assumes that cleaning is complete 
and starts cleaning again from the beginning.
Cleaning and maintenance
Note
 
f
If you washed the dustbin and filter with water 
 
– Dustbin: Completely wipe out the water.
 
– Filter: Completely dry it in a shade before use.
 caution
 
f
Watch your finger when attaching or 
detaching the filter, since they may get stuck 
in the dustbin's intake.
 
f
To avoid blockages by foreign matter, do not 
let toothpicks, cotton swabs etc. from being 
vacuumed by POWERbot. 
 
f
If it is difficult to remove foreign matters from 
the Power brush, contact a service center. 
SR20H9050U_EN_DJ68-00716G-00_EU.indd   22
2014-08-18   오후 6:03:44