Справочник Пользователя для Samsung SD9420

troubleshooting

PROBLEM

SOLUTION

Motor downs and does 
not start.

•  Check cable, plug and socket.

•  Leave to cool.

Suction force is gradually 
decreasing.

•  Check for blockage and remove.

Cord does not rewind 
fully.

•  Pull the cord out 2~3m and push down the cord rewind button.

Vacuum cleaner downs, 
does not pick up dirt

•  Check hose and replace if required.

Water leakage from the 
dust bin.

•  Check rubber packing inserted tightly at the upper part.

•  Check rubber packing to the lever at the bottom of the dust 

bin.

Excessive water drops 
from the inside of the 
body.

•  Some droplets on the inside body are to be expected. 

Please dry the aqua cyclone fully.

Dirty water comes out 
of the top of the main 
body

•  Check the filter is located properly.

•  If the amount of water becomes excessive, check if water 

inside dust bin is over the max line and make the water level is 
under the max line.

Water comes out from 
the back cover.

•  Check the water level of the aqua cyclone.

•  Please operate the vacuum cleaner without the aqua cyclone 

until water does not come out from the back cover.

Low or decreasing 
suction.

•  Please check filters. If required clean it as illustrated in the 

instruction. If filters are out of conditions, change them to new 
one.

Body overheating

•  Please check filters. If required clean it as illustrated in the 

instruction.

Static electricity 
discharge

•  Please decrease power suction.

Unpleasant smell during 
vacuuming

•  Please note that there may be a slight smell during vacuuming 

when the cleaner is new (4-5 days).

DJ68-00523C-08.indb   15

13. 10. 29.   �� 10:40