Справочник Пользователя для Samsung Galaxy S6

Скачать
Страница из 123
Assemble Your Device 
Getting Started
Assemble Your Device  
This section helps you to 
assemble your device. 
Install the Nano SIM Card 
When you subscribe to a cellular network, you are 
provided with a plug-in SIM card. During activation, 
your SIM card is loaded with your subscription 
details, such as your Personal Identification Number 
(PIN), available optional services, and other 
features. 
Warning: Please be careful when handling the 
SIM card to avoid damaging it. Keep all SIM cards 
out of reach of small children. 
Caution: Exercise care when using the removal tool to 
eject the internal SIM card tray. 
1.   Insert the removal tool into the hole on the 
SIM card tray, and then push until the tray 
pops out. 
2.  Place the SIM card on the tray. 
• 
Make sure that the card’s gold contacts face 
down into the device and that the card is 
positioned as shown. 
3.  Slide the SIM card tray back into the slot. 
Caution: If the SIM card is not inserted correctly, the 
device cannot detect it. Reorient the SIM card and 
place it back into the slot if it is not detected. 
Charge the Battery 
Your device is powered by a rechargeable, standard 
Li-Ion battery. A USB charger (charging head and 
USB cable) is included with the device for charging 
the battery from any standard outlet. 
The battery comes partially charged. A fully 
discharged battery requires up to four hours of 
charge time. You can use the device while charging. 
Note: It is recommended you fully charge the battery 
before using your device for the first time. 
Note: For fastest charging times, use the Samsung 
Adaptive Fast Charger that came with your device. 
This charger provides faster charging only when 
connected to devices that support Adaptive 
Fast Charging. 
Caution: Use only charging devices and batteries 
approved by Samsung. Samsung accessories are 
designed for your device to maximize battery life. 
Using other accessories may invalidate your warranty 
and may cause damage. 
1.   Insert the USB cable into the USB charger/ 
Accessory port. 
2.  Connect the USB cable to the charging head, 
and then plug the charging head into a standard 
outlet. 
3.  Unplug the charging head from the outlet and 
remove the USB cable from the device when 
charging is complete.