Справочник Пользователя для Samsung Galaxy Note II

• 

Wi-Fi timer: When turned On, your phone will automatically connect or 
disconnect from a Wi-Fi network, using the Starting time and Ending times you 
set. 

• 

Install certificates: If you have certificates stored on an installed optional 
memory card (not included), you can use this option to install the certificates. 

• 

MAC address: (Not configurable) View your device’s MAC address, needed for 
connecting to some secured networks. 

• 

IP address: (Not configurable) View your device’s IP address. 

  WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or 

other equipment. 

  WPN PIN entry: View the PIN used by your device to set up a PIN-secured 

connection to a Wi-Fi router or other equipment. 

Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network 
or hotspot, and without having to set up the connection. For example, your device can use Wi-Fi 
Direct to share photos, contacts and other content with other Wi-Fi Direct devices. 

1.  Press 

 and then tap 

 > Settings > Connections.  

2.  Tap Wi-Fi, and then tap the ON/OFF switch beside Wi-Fi to turn Wi-Fi On. Wi-Fi must 

be On to configure Wi-Fi Direct settings. 

3.  Tap Wi-Fi Direct at the bottom of the screen. Your device automatically scans for 

nearby Wi-Fi Direct devices, or you can tap Scan to start scanning. 

4.  After scanning for devices, select a device, and then follow the prompts to complete the 

connection. 

– or – 

Tap Multi connect to create a connection to devices that support multi-connect. Tap 
Scan to search for available multi-connect devices, and then select the devices and 
follow the prompts to complete the connection. 

Use the Hotspot feature to share your phone’s data network connection with other devices via 
Wi-Fi. 

Note: Using the Hotspot feature consumes battery power and uses data services. 

Settings 

122