Справочник Пользователя для Samsung 2009 LED TV

Problem 

Anynet+ does not work.

Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, Operating 

Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or 

turn your TV off and on again.
Check if the Anynet+ Function of Anynet+ device is set on.

●
●
●
●
●
●
●
●

●

●

I want to start Anynet+.

Check if the Anynet+ device is properly connected to the TV and check if the 

Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the 

TOOLS button to 

show the Anynet+ menu and select a menu you want.

●

●

I want to exit Anynet+.

Select 

View TV in the Anynet+ menu.

Press the 

SOURCE button on the TV remote control and select a device other than Anynet+ 

devices.
Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that the 

channel button operates only when a tuner-embedded Anynet+ device is not connected.)

●
●

●

The message ‘Connecting to 

Anynet+ device...’ appears on 

the screen.

You cannot use the remote control when you are configuring Anynet+ or switching to a view 

mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.

●

●

The Anynet+ device does not 

play.

You cannot use the play function when Plug & Play is in progress.

●

The connected device is not 

displayed.

Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether 

Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not 

support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord 

or a power failure, please repeat the device scan.

●
●
●
●
●

●

The TV program cannot be 

recorded.

Check whether the antenna jack on the recording device is properly connected.

●

The TV sound is not output 

through the receiver.

Connect the optical cable between TV and the receiver.

●

¦

[8500-NA]BN68-02322C-Eng.indb   65

2009-07-28   �� 11:23:48