Справочник Пользователя для Samsung SR8855

 

Operating the cleaner

Operating the cleaner

INSTALATION ORDER

     To use the robotic vacuum cleaner, you must turn on the Power Switch at the 

bottom of the main unit.

     To charge the robotic vacuum cleaner, you must first install 

the charger.

     Since the battery is discharged when the product is 

purchased, you must fully charge the battery before use.

     You should charge the battery completely before using the 

robotic vacuum cleaner.

     You should set the time to use the scheduled and daily 

cleaning options.

     You can confine the robotic vacuum cleaner to a particular section by using Fence 

(virtual wall) mode or clean several sections one by one using Guard (virtual door) 

mode.

TURNING THE POWER SWITCH ON OR OFF

If the Power Switch is turned off, the robotic vacuum cleaner will not be charged

even if it is docked with the charger station.

To use the robotic vacuum cleaner, you must turn the

Power Switch on.

If you turn the Power Switch off, all settings will be reset.

    -   If the icons are not turned on, it indicates that the 

battery charge is depleted. In this case, dock the 

robotic vacuum cleaner to the charger station after 

turning the Power Switch on.

    -   The configured time may be different from the current 

time. If the configure time is incorrect, set the time to 

the current time.

DJ68-00518V(0.0).indb20

2010.4.39:5:25AM