Справочник Пользователя для Samsung Digital Display Double Wall Oven

Скачать
Страница из 156
English  41
Maint
aining y
our applianc
e
3. 
If there is debris in the slide tracks, 
wipe it away using a paper towel. (Any 
graphite lubricant wiped away must be 
replaced - See steps 4 through 7.
4. 
Shake the graphite lubricant before 
opening it. Starting with the left (front 
and back) slide mechanism of the rack, 
place four (4) small drops of lubricant 
on the two (2) bottom tracks of the 
slide close to the bearing carriers.
5. 
Repeat for the right (front and back) 
slide mechanism of the rack.
6. 
Open and close the rack several times 
to distribute the lubricant.
7. 
Replace the cap on the lubricant and 
shake it again. Turn the rack over and 
repeat steps 3, 4, 5 and 6.
8. 
Close the rack, turn the rack right-side-
up, and then place in the oven. See 
installing the gliding rack in USING THE 
GLIDING RACK on page 24.
NOTE
• 
Do not spray the gliding rack with 
cooking spray or other lubricant sprays.
Oven door
Don’t hand 
clean the 
oven door 
gasket.
You may 
hand clean 
the door.
• 
Use soap and water to thoroughly 
clean the top, sides, and front of the 
oven door. Rinse well. You may use a 
glass cleaner on the outside glass of 
the oven door. DO NOT immerse the 
door in water. DO NOT spray or allow 
water or the glass cleaner to enter the 
door vents. DO NOT use oven cleaners, 
cleaning powders, or any harsh 
abrasive cleaning materials on the 
outside of the oven door.
• 
DO NOT clean the oven door gasket. 
The oven door gasket is made of a 
woven material which is essential for a 
good seal. Care should be taken not to 
rub, damage, or remove this gasket.
NV51K6650DS_DG68-00854A-00_EN+MES+CFR.indb   41
2016-08-16     6:52:25