Справочник Пользователя для Samsung SR8980
troubleshooting _49
05 TROUBLESHOOTING
Symptom
Checklist
Measure to Take
The vacuum cleaning
robot frequently
collides with the
autoemptier.
robot frequently
collides with the
autoemptier.
Check whether the autoemptier
•
Turn on the power switch on the
•
left side of the autoemptier.
Plug the power plug into the outlet.
•
The auto-emptier
does not empty
the dustbin
automatically.
does not empty
the dustbin
automatically.
Check whether there is a foreign
•
substance on the fi lter.
Clean the fi lter.
•
Check whether there is a foreign
•
substance inside the dustbin.
Remove the foreign substance
•
from the inside of the dustbin.
The bottom of the autoemptier is
•
clogged.
Open the bottom of the auto-
•
emptier using a coin and then
remove the dust clogging it.
remove the dust clogging it.
Check whether the dustbin
•
cyclone cap exists.
Close the dustbin cyclone cap.
•
Check whether the auto empty
•
lamp of the auto-emptier is turned
on.
on.
Press the Auto Empty On/Off
•
Select button on the auto-emptier.
Check whether the dustbin is
•
separated from the autoemptier.
Turn off the auto-emptier and then
•
insert the dustbin fully until it is
mounted completely.
mounted completely.
Check whether the fi lter is
•
separated from the autoemptier
dustbin.
dustbin.
Turn off the auto-emptier and then
•
mount the fi lter onto the dustbin.
Check whether the Power
•
Brush wrapped in any foreign
substances.
substances.
Remove any foreign substances
•
such as long hairs or strings
wrapped around the power brush.
wrapped around the power brush.
The suction power of
the auto-emptier is
week.
the auto-emptier is
week.
Check whether the Full lamp is
•
turned on.
Empty the dustbin.
•
Clean the air inlet of bottom.
•
Check whether the air inlet is
•
clogged by a foreign substance.
Remove the foreign substance
•
from the air inlet.
Check whether dust has collected
•
on the fi lter.
Clean the fi lter.
•
Check whether dust or hairs have
•
collected on the cyclone.
Open the cyclone cap and then
•
remove any dust and hair.
The vacuum cleaning
robot is not charged.
robot is not charged.
Check whether there is a foreign
•
substance on the charging
terminals.
terminals.
Remove the foreign substance
•
from the charging terminals.
Turn on the power switch of the
auto-emptier.
Turn on the power switch of the
auto-emptier.
Check whether the autoemptier is
•
turned on.
DJ68-00632C.indb 49
DJ68-00632C.indb 49
2012.1.25 10:56:9 AM
2012.1.25 10:56:9 AM