Справочник Пользователя для Samsung SR10M701BUW
ENGLISH-07
CAUTION
Before use
f
Insert the dustbin before using
POWERbot.
POWERbot.
f
Be careful with the followings for proper
automatic recharging.
automatic recharging.
– Always turn on the power of the docking
station.
– Install the docking station where
POWERbot can easily find.
– Do not leave any object in front of the
docking station.
f
When installing the docking station, do
not leave the cord carelessly on the floor
since POWERbot may get tangled by it.
not leave the cord carelessly on the floor
since POWERbot may get tangled by it.
f
Do not use POWERbot on black colored
floors.
floors.
– The POWERbot may not be able to operate
normally.
f
Do not place any objects within 0.5 m
to both sides and 1 m to the front of the
docking station.
to both sides and 1 m to the front of the
docking station.
f
Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
contact is not damaged or have any
foreign matters on it.
f
Do not install the docking station in an
area with a dark floor.
area with a dark floor.
– If the floor around the docking station is
dark, recharging is hindered.
f
Move any obstacles that may disturb
POWERbot's movement (such as
children's indoor swing or slides) before
cleaning.
POWERbot's movement (such as
children's indoor swing or slides) before
cleaning.
f
Do not use the POWERbot in a place
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
CAUTION
In use
f
Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
damage both POWERbot and the carpet.
– The POWERbot cannot pass over carpet
that is thicker than 1 cm.
f
Do not use POWERbot on tables or other
high surfaces.
high surfaces.
– There is a risk of damage if it falls.
f
The POWERbot may bump into chair,
desk legs therefore move them away for
faster and efficient cleaning.
desk legs therefore move them away for
faster and efficient cleaning.
f
When POWERbot is operating, do not lift
it up or carry it to another area.
it up or carry it to another area.
f
Do not hold by driving wheels of
POWERbot when carrying it to another
area.
POWERbot when carrying it to another
area.
f
Do not put any objects on top of
POWERbot and camera since it may
cause malfunction.
POWERbot and camera since it may
cause malfunction.
f
Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
immediately when using POWERbot since
they may block the intake.
f
Do not aim the red pointer directly at
people or animals.
people or animals.
f
Do not lie down around the POWERBOT
that is running.
that is running.
– Your hair may be caught in the brush,
resulting in physical injury.
CAUTION
Cleaning and
maintenance
maintenance
f
Prevent any damage to POWERbot by
complying with the following
complying with the following
– Do not clean POWERbot by spraying water
directly onto it or use benzene, thinner,
acetone or alcohol to clean it.
acetone or alcohol to clean it.
f
Do not disassemble or repair POWERbot.
This should only be done by a certified
repairman.
This should only be done by a certified
repairman.
f
Always keep the obstacle sensor, cliff
sensor and camera clean.
sensor and camera clean.
– If foreign matter accumulates, sensors may
malfunction.
1_VR7000_EN_DJ68-00763G-02_SB.indd 7
2017-02-20 오후 5:26:13